kennywest

I've been using f-spot for quite some time now to manage my photo collection. When looking at their homepage, I noticed the last version was released somewhere in 2010 (?). In software terms, this makes f-spot ancient technology :) so I started to wonder. Browsing through their mailinglist, I came across this thread. In short, f-spot isn't dead yet, but it is not actively maintained anymore. This means that stability issues and bugs probably won't get addressed any time soon. Fortunately, someone wrote a script to migrate the f-spot database to digikam. Maybe I should give this a try ... I'll keep you posted.

In an earlier post I forgot to mention that installing NetBSD using the Restore CD option will wipe out your whole drive. So, before I started, I disconnected the hard drive and installed everything on the CF card. A basic installation of NetBSD does not require a lot of space. The 1 GB CF card was big enough for a basic install, but, to be able to use pkgsrc , I installed a 4 GB card. After I verified the installation was working properly, I decided to connect the hard drive again. This is where the problems started :( VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at pci0 dev 9 function 2 not configured tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 tlp1: interrupting at level 2 tlp1: Ethernet address 00:10:e0:00:3c:5d lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wd0 at atabus0 drive 0: wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sector

Some time ago I described my adventures in installing Debian (Lenny at that time) on an old Qube 2. It was cool to install it, but I didn't find a proper use for it. So it has been gathering dust for a while, until I decided to use it as a backup server for my desktop and wyse . So, this weekend I decided to fire up my favorite mondo script and create a backup for the wyse (before dist-upgrading it to squeeze). Unfortunately this didn't work very well. The moment the network card in the Qube gets some load it starts to hang. After some time in the backup process, I couldn't ping the Qube any more. The serial console didn't respond either, so I think it died. Putting a newer network card in the box's free PCI slot did not solve my issues either. It seems that Debian (or maybe even Linux) is just not stable enough to cope with a lot of network traffic / load. So in short, Debian failed miserably turning the Qube in a decent (albeit slow) NAS. After googling for a